 73 Fury 400 Engine - help needed in choosing a new carb |
  |
 Aug 24 2012, 05:33 PM
Post
#1
|
|
|
New Member  Group: Members Posts: 5 Joined: 13-February 08 From: Israel Member No.: 2,928  |
Hi guys,
I want to change my 2bbl carb for a new 4bbl Holley carb in my 73 Fury 400 engine. I prefer low end power and torque and I know the engine is a low-compression. I don't want the carb to be too big so i was recommended on the 570cfm. The final options are as follows: http://www.summitracing.com/parts/HLY-0-83570/ http://www.summitracing.com/parts/HLY-0-80457SA/ http://www.summitracing.com/parts/HLY-0-83670/ I will be grateful for your advise. Thanks, Hemi -------------------- Hemi is my name, '73 Plymouth Fury is my car
|
 |
 
|
 Aug 26 2012, 05:43 AM
Post
#2
|
|
 Advanced Member Group: Administrators Posts: 2,496 Joined: 13-October 06 From: ST.Lazare Quebec Canada Member No.: 197 |
What you need is a dual plane intake and a 700 CFM vacuum secondary carb.So in the future, you can and headers and dual exhaust,and have great response.Make sure to block off the heat cross over when replacing the intake.If you have a 2 bbl carb now,you will most likely need to modify the cable and linkage to work the 4 BBL carb,mrmopartech
|
|
|
|
|
| Lo-Fi Version | Time is now: 19th May 2013 - 09:44 AM |