 Hello from Ontario, Canada |
  |
 Jul 2 2012, 04:48 PM
Post
#1
|
|
|
New Member  Group: Members Posts: 4 Joined: 2-July 12 From: Brantford, Ontario Canada Member No.: 10,802  |
Hello Everyone!
My name is Joe, I'm from Brantford Onatrio Canada. I recently became the proud owner of a 1964 Chrysler Windsor, with a stock 361. I decided to replace the 2 barrel, with a 4 barrel carb, and switch to an electronic ignition system. I am having problems now, I have no spark, and following the wiring diagram everything is hooked up properly. I have battery voltage at both side of the ballast resistor. can anyone help me with whats going on/ Thanks |
 |
 
|
 Jul 2 2012, 06:20 PM
Post
#2
|
|
 Advanced Member Group: Administrators Posts: 2,500 Joined: 13-October 06 From: ST.Lazare Quebec Canada Member No.: 197 |
Joe,welcome to the site,and I can help you big time.You can email me your number and i will call you as I am just inside the Quebec border and will find the problem.My number is 450 424 0445 home or cell at 514 659 0445,mrmopartech
|
|
|
|
|
| Lo-Fi Version | Time is now: 21st May 2013 - 06:02 AM |