A Body Cars For Sale Options

[jim_okane]

1967 Dodge Dart GT. 360, 727 torqueflite tranny. 3spd. Hurst shifter on the floor. Less than 2,000 miles on the new 360 engine. Garage kept. Reliable daily driver and head turner.

Motivated seller. $10K/OBO



contact: info at jokane dot com

[mrmopartech]

Jim,can you email me some more pics of the car?mrmopartech

[Anthony]

There was a clean all original Dart Swinger across the street from me that just sold to one of those type's that just buy them to rip them up and sell off the pieces for $200. I am not a big fan of Dart's, so I did not bother with it. They look great , but I like a bigger car for cruising.
Ant

[mopar_murph]

1965 Dodge Dart for sale. $1200 OBO. Sitting in primer now, but still needs some more body work. I had to seal it up before the rainy season started up here in the Great Northwest. It is a 225 slant six with a 3 speed manual transmission. The interior is shot, it will need all new seat covers, and a headliner. The car comes with a spare 318 and a 904 transmission. If I get a bellhousing to put the 3 speed manual on the 318, I will go ahead and install the 318 into the car. I've got so many other projects around here, I need to get rid of a couple. The price is always negotiable, and I'm not looking to make a profit off of this one. Shoot me an email with an offer and we'll make a deal.
Jason Murphy
mopar_murph@yahoo.com

[trevd]

a mate of mine in newyork has this for sale, i coppied the post from another site (im too lazy to type it all out) ita a genuine car and the bloke Andy is 100% genuine mopar lover. i helped him put a 1300hp procharged smallblock in his dart.he needs to clear some cars and parts , first to go is this rare australian charger. hes looking for arround $4500 but will probably drop a bit for a quick sale
tell him i sent you
Well boys and girls the time has come to clear some stuff out due to an unfortunate set of circumstances which I won't go into just now I need to get rid of one of the cars and the Aussie charger is it!
It's a 1977 CL and is straight and not rusty, good interior and all that old blah. I've refitted the hemi 265 motor, I bought an after market 4 barrel intake for it and it's got a new Edlebrock thunder series carb.
If anyone wants it email me and we'll see if we can come up with a deal, I don't honestly know what it's worth but I'm sure we can work something out. This has to happen quickly though- sneal@hvc.rr.com, the clock is ticking

Attached File(s)

 new_charger_1_143.jpg ( 96.37K ) Number of downloads: 544
 new_charger_3_144.jpg ( 124.27K ) Number of downloads: 406
 new_hemi_intake_197.jpg ( 76.46K ) Number of downloads: 330

 

[7071dartgtreg]

a mate of mine in newyork has this for sale, i coppied the post from another site (im too lazy to type it all out) ita a genuine car and the bloke Andy is 100% genuine mopar lover. i helped him put a 1300hp procharged smallblock in his dart.he needs to clear some cars and parts , first to go is this rare australian charger. hes looking for arround $4500 but will probably drop a bit for a quick sale
tell him i sent you
Well boys and girls the time has come to clear some stuff out due to an unfortunate set of circumstances which I won't go into just now I need to get rid of one of the cars and the Aussie charger is it!
It's a 1977 CL and is straight and not rusty, good interior and all that old blah. I've refitted the hemi 265 motor, I bought an after market 4 barrel intake for it and it's got a new Edlebrock thunder series carb.
If anyone wants it email me and we'll see if we can come up with a deal, I don't honestly know what it's worth but I'm sure we can work something out. This has to happen quickly though- sneal@hvc.rr.com, the clock is ticking

Is this Charger still for sale? Let me know please. Thanks!

[68cudaparts]

i have a 68 cuda conv. rolling chasis for sale. California car, no rust in trunk or floor. Body is straight. It's a factory air car, originally a 318. It now has an 8.75" posi rear with 2.92:1 gear. The front suspension is completely rebuilt with a sway bar added. It has factory disk brakes that are in good working order. The top is in good shape (black) with one small tear and glass back window with all hardware in working condition. The tires are in excelent condition and are BFG TA radial 14". The rims are not correct. All the glass but the windshield is there and is the factory tinted glass because it's an a/c car. All the wiring is there and in good shape. The dash assembly is there, except for the guage cluster. there is no interior or trim. i'm in southern Cal. email direct to propertynoc@yahoo.com ... or call 714-738-4875 $3500

Attached File(s)

 cuda_1.JPG ( 82.45K ) Number of downloads: 198

 

[Four40Cuda]

1975 Plymouth Duster 383 big block Mopar 484/284 purpleshaft cam, 906 heads, aluminum intake, Holley carb, fenderwell headers. Three inch exhaust with 2 chamber flowmaster mufflers. Ten inch 3800 stall fresh rebuilt 727 trans with reverse manual valvebody. 8 3/4 rearend stock location with 4.11 gears. White interior with split bench seat and newer carpet. Aftermarket tach and gauges and B&M rachet shifter Jegs switch panel. The body is in good shape, the only rust is on the right lower 1/4 panel and a small spot in the left front floor pan. The trunk and frame rails are in very good shape. This car runs hard and strong and is a total sleeper. Has 14inch slots and drum brakes on all four corners. This car is in very good shape and runs strong. it will make someone a nice street car. This car has not been hacked up and does not have a roll cage. Open to reasonable offers-asking $6500OBO
located in Illinois
pdink1978@yahoo.com

MUST SELL!!!!!!!!!!!!!!!!!!!!!!!!!!

[kawmagnum]

Bulk Sale due to Move ASAP. Located in Rochester NY area.
1967 Bar Conv In primer ready for block & Paint original 6cyc auto- converted to 340 4sp. Motor is apart. Tranny good.- Top mechanism, interior panels most Trim. original Rear seat and odd buckets. Original rear end.

1970 swinger 340 4sp scat pack, Needs finish-partially restored. excellent original undercarraige, Includes rally wheels, new grill, good chrome, new dash pad and miscellaneous parts. Front Bench & rear seat. Needs install of new rear qurter(Included). Hood, scoops, Int panels. Motor is still in car and runs. Have original invoice, sales slip & build sheet.
Miscellaneous parts, guage sets, 8 3/4, wheels etc Sell all for $10,000 Will send photos.

[Four40Cuda]

1968 Dodge Dart GTS

Original 383 big block H-code 4 speed car

Selling as rolling chassis-no engine or transmission. Dana 60 rearend with leafsprings and 4.56 gears. Front suspension is straight axle setup for the old school drag racer. The body is in very good shape and the paint shines decent. All windows work and are original except the rear glass which is now lexon. The hood and trunk are fiberglass and all other panels are original metal. Black interior with bucket seats and four speed hump and pedals are still in the car. New Weld Draglite rims on Hoosier 29x12x15 slicks with 60% tread. The car is in good shape and would be a nice nostalgia drag car. I have a clear tile for the car and the VIN matches the dash ID.

$4000.00 OBO
Raymond,Illinois
pdink1978@yahoo.com
http://www.racingjunk.com/post/997584/1968...e-Dart-GTS.html

1975 Plymouth Duster 383 big block

Mopar 484/284 purpleshaft cam, 906 heads, aluminum intake, Holley carb,Holley ele blue pump fenderwell headers. Three inch exhaust with 2 chamber flowmaster mufflers. Ten inch 3800 stall fresh rebuilt 727 trans with reverse manual valvebody. 8 3/4 rearend stock location with 4.11 gears. White interior with split bench seat and newer carpet. Aftermarket tach and gauges and B&M rachet shifter Jegs switch panel. The body is in good shape, the only rust is on the right lower 1/4 panel and a small spot in the left front floor pan. The trunk and frame rails are in very good shape. This car runs hard and strong and is a total sleeper. Has 14inch slots and drum brakes on all four corners. This car is in very good shape and runs strong. it will make someone a nice street car. This car has not been hacked up and does not have a roll cage. Open to reasonable offers-asking $5500OBO
pdink1978@yahoo.com
Raymond,Illinois
http://www.racingjunk.com/post/997595/Plymouth-Duster.html

1969 Dodge Dart Swinger 340 4 speed car

This car is a project that has very good structure, starting with the frame. The fenders and doors are in good shape along with the floor pans. The trunk is very solid and the inner fenders are as well. The car is an original bench seat car but now has aftermarket buckets. Interior is black and is going to need to be redone. Still has the four speed pedal and hump. Someone put a automatic transmission with a console in at one time. Has the factory 8 ¾ rearend, ratio is unknown and the rear frame has torque boxes. I have most of the parts for the car but am missing the front grille and hood. Manual steering and drum brakes with small bolt pattern. I do have the fender tag but no build sheet. The fender tag reads; G15-tinted front windshield,G33-left hand outside mirror, R11-AM radio, V1W-white vinyl top, V8W-white bumble bee stripe,Q5-seafoam turquoise metallic blue, D2X-deluxe black vinyl bench seat, X9-black upper door frame, E55-340 4bbl 275hp engine, D21-A833 4speed transmission floorshift. And the vin is LM23P9BXXXXXX

$4000.00 OBO

[DragonDon]

Looking for a Duster, any year, must be driveable, any motor (prefer V8). Ideally local in Ontario

Please contact me:

dragondon@dragondon.net

Thanks!

Don

[jar84203]

Im looking for a 71 duster with a manual transmission near the southern california area. Engine size does not matter.

[black68]

selling my 70 dart, no eng or trans, but I do have all the parts for the a/c and p/s hookups for a /6, as well as the trans for it. There is no rust underneath the car, and the only place there really is rust is on the outside of fenderwells. Interor is in very nice shape, rear is an 8 3/4. I am asking for 2500 for the body and /6 parts that go with it. I would also be interested in trading for a 68 or 69 dart of equal value. Contact me at : diamond_dog80@ yahoo.com if you would like to see pics, or perhaps make an agreement on a price. Thanks

[hurrikane]

For Sale - 1972 Plymouth Scamp - All receipts and paperwork, Original A/C Car, V8 318, Cam, Lifters, Headers, Exhaust. Can email additional pictures if you'd like. Located in Huntington, NY
Asking $12,500 neg. Call or email anytime 646-823-3208

Attached File(s)

 pixs_009.jpg ( 562.18K ) Number of downloads: 39
 pixs_006.jpg ( 670.11K ) Number of downloads: 35
 pixs_003.jpg ( 668.47K ) Number of downloads: 30
 pixs_011.jpg ( 704.32K ) Number of downloads: 34

 

[72swinger]

1972 Scamp /6 At PS for sale $800.

My daily driver for the last 10 years. Still registered & on the road. 225 slant 6, 904 AT, power steering, am/fm Cd with aux input. Redone interior,everything works, newer tires. Starts & runs great, drive it home. Needs body work, Car is in Ct. Bought a new car, need the room. email: prysm2@hotmail.com

Attached File(s)

 ds1.jpg ( 86.44K ) Number of downloads: 39

 

[The Mopar Dude]

67 Plymouth Barracuda fastback, rebuilt numbers matching 273 2bbl, console automatic, power steering, full dual exhaust with OE Challenger tips under the valance, factory vacuum gauge in dash, very useable original red interior. Previous owner had this car just a few weeks short of 30 years. Has been maintained as a primary car for a greater portion of that time. Numbers matching engine has less than 500 miles on a .030 overbore complete rebuild, bone stock internals, stock manifolds and 2bbl carb. Transmission is a rebuilt 904 (#'s matching trans also goes with it) and works better than new. Everything works on this car, all glass is good, recent tires on 14" rallyes. Light rust in rear quarters and spare well. Frames, floors window corners, cowl, doors, hood and trunklid are in good shape.
Good daily driver or starting point for big block conversion. Would make an excellent first car for the young Mopar enthusiast. Drives well enough that it takes no coaching before handing over the keys. Mechanically dependable, economical to operate and easy to drive. This has become my daily driver and I wouldnt be afraid to drive it anywhere in the North American continent at a moments notice.
The car is located in Burlington, Kansas 66839, 70 miles south of Kansas City on I35. More pics can be found at www.themopardude.com or call me at 620-364-8200
$6900

Attached File(s)

 67_BARRACUDA_002.jpg ( 294.46K ) Number of downloads: 25
 67_BARRACUDA_005.jpg ( 248.48K ) Number of downloads: 24
 interior_driver_side.gif ( 171.99K ) Number of downloads: 22

 

[waynewl41]

For Sale Here is my listing as advertised on a few sites The Blower will nolonger come with the vehicle a Dual 4 or single 4 carb Will
You can call me at 443-677-2963


1987 Chrysler Conquest
1987 Chrysler Conquest 443-677-2963 Wayne
Can Drive on the Street, I just relocated the Strut bars to get a full turning ratio.
The Blower is up for sale seperatley but if it dont sell before the car it will go with it . If it does , The car will have a Multi Port injection system on it or a 6 pack or something equilvelent
There will be $1,000.00 of the price if the blower is not with it.
The Drive train now has 40 miles on it.
I am selling it as i run into Financial difficulties and Home Comes first
Please contact me with any questions. This car will be listed on other sites as well and I am sure it will go fast
Call me 443-677-2963


Clear Title Current Tags
Power Windows, Rear Window Wipers, Remote Mirrors, Sun Roof, Digital Dashboard
APC bucket seats, Grant wheel, Full Harness Seat Belt Sets, Etc.
This car has less than 3 hours on the engine since it was built and never been down the strip
340 Cubic Inch LA Mopar .030 over all new inside, no junk
8.0 to 1 Forged Aluminum custom built Diamond Pistons .927 Wrist pins
Complete 4340 Eagle rotating assembly with ARP Bolts, 7 Quart oil Pan
Comp Cam Hydraulic staggered lift .507/.510 duration 240’/246’ @ 50’ 108’ Centerline
Harlan Sharp Roller Rocker Arms
New Edelbrock Aluminum Heads fully ported/polished All MSD ignition system 6al with Aeromotive fuel management module
671 Blower in excellent condition , 8lbs Boost @ 6000rpm, will hold 15 lbs of boost with no problem
Custom built and coated 1-5/8” tube headers into 3" collectors side exiting into new Bullet Mufflers
Upper valley oiling modifications installed to prevent low end oil starvation at high RPM
(2) 600cfm Holley Carbs milled off Choke horns, 30cc pumps, quick change secondary's kit
All new fuel system with pump, lines, filter, regulator, gauges, AN fittings thruout the fuel system.
Electric Fan, Aluminum Radiator, Overflow Catch tank, Mustang Rack & Pinion steering
New 727 Transmission with Cheetah forward shift valve body, bolt in sprag
Ford 8.8” rear end with a full spool, 35 spline axels and 3.71 Gear set
4 link rear suspension with coil over adjustable shocks
Hurst/Holley ¼ stick shifter with new cable
4 Wheel manual Wilwood Disc Brakes, 8 Gallon fuel Cell, 10 Point Cage, Custom built drive shaft
Nice factory paint job . M/T 10.5" ET Street Radials on Centerline Wheels, Will hold 16" wide tires
All new 4” bullet muffler system with Dynatech Cones, Stainless Bullet Side Packs

[74 Duster]

That's a nice looking Scamp. I've been looking for one but, I just can't afford it right now. Have you had any luck in selling it?

Kevin

[1971_Demon]

I have a 1971 Demon available. I am not giving this car away so please don't contact me offering $1,000. The car runs/drives and is tagged through 04/2009. Was driven daily by myself to and from home. work and school for over the past year. I am more of a Ford guy, have two other projects right now, don't really need a third. Looking for best offer on the vehicle.

James
209.518.4894

[jmetz1969]

72 duster 318 4spd car, now 440 auto, 540 soild cam, ported heads, trw's 10.1, main studs, have head studs, done rite motor ran 12.45 in a 4000lb charger motor has about 500 miles on it
trans 727 4200 dynamic converter man.valve body never run all new bolt in sprage new cheetha shifter new drive shaft
rear, mosher axles, new in the box bearing set 489 needs gears new super stock springs
front, big bolt disk's ex studs rebuild front end new ulm rad tti headers
body, new rear qu. 3 sets of fenders glass is in great shape
7500.00 for all or 5000.00 for body, motor 2500.00 cell (605)759-6788

Attached File(s)

 duster_pic__s_001.jpg ( 522.08K ) Number of downloads: 14
 duster_pic__s_002.jpg ( 481.85K ) Number of downloads: 20
 duster_pic__s_004.jpg ( 467.62K ) Number of downloads: 8
 duster_pic__s_005.jpg ( 460.9K ) Number of downloads: 10
 duster_pic__s_009.jpg ( 513.58K ) Number of downloads: 13
 duster_pic__s_007.jpg ( 438.91K ) Number of downloads: 9
 duster_pic__s_003.jpg ( 439.17K ) Number of downloads: 16

 

[VGRob]

a mate of mine in newyork has this for sale, i coppied the post from another site (im too lazy to type it all out) ita a genuine car and the bloke Andy is 100% genuine mopar lover. i helped him put a 1300hp procharged smallblock in his dart.he needs to clear some cars and parts , first to go is this rare australian charger. hes looking for arround $4500 but will probably drop a bit for a quick sale
tell him i sent you
Well boys and girls the time has come to clear some stuff out due to an unfortunate set of circumstances which I won't go into just now I need to get rid of one of the cars and the Aussie charger is it!
It's a 1977 CL and is straight and not rusty, good interior and all that old blah. I've refitted the hemi 265 motor, I bought an after market 4 barrel intake for it and it's got a new Edlebrock thunder series carb.
If anyone wants it email me and we'll see if we can come up with a deal, I don't honestly know what it's worth but I'm sure we can work something out. This has to happen quickly though- sneal@hvc.rr.com, the clock is ticking

Hi, I've just joined the group and spoted this post so it's probably abit late to let you know. In Australia these cars sell for between $12 000 and $70 000Au. The E38,E39 etc are all $30000 plus. This one would have to be $15-$20 000. But that's in Oz where they have a nich market. Those 265s used to blow the ford 351s into the weeds!
Hope you got what you wanted for it.

[isaac7600]

1974 Dodge Dart Custom - BAY AREA CALIFORNIA- Very well maintained for its age - It features a stock v8 318 5.2 engine with automatic transmission, runs like a champ on the road and the freeway.
Other features are:
-electronic ignition
-power steering
-fully functional AC
-new front air shocks
-drum breaks
-new tires and hub caps
-new heater core
This car can be a nice restoration project, the engine can use a rebuild or upgrade its performance. Can use a new interior as well.
-I have a "how to rebuild a small block mopar" guide than I can give you for free. I'm asking for $1000 or best offer. Call 510-395-3096 - I am

[wnarunm]

HAVE A 70 DART SWINGER FOR SALE, GREAT POTENTIAL FOR BUILDER CAR.

318,727,7 1/4 rear, needs intake,carb,distributor to run,was 6cyl car, also needs windshield and side door glass. car has been in barn for 13yrs. have several pics, very solid car, 1 pic is in barn 1 is after i got it home and washed it. wow.

618-364-6192
loctaed in marion,il

Attached File(s)

 P6270001.JPG ( 166.59K ) Number of downloads: 15
 P6270001.JPG ( 164.21K ) Number of downloads: 21

 

[wnarunm]

HAVE A 70 DART SWINGER FOR SALE, GREAT POTENTIAL FOR BUILDER CAR.

318,727,7 1/4 rear, needs intake,carb,distributor to run,was 6cyl car, also needs windshield and side door glass. car has been in barn for 13yrs. have several pics, very solid car, 1 pic is in barn 1 is after i got it home and washed it. wow.

618-364-6192
loctaed in marion,il

$3500.00 firm

[rotobeast]

$3500.00 firm

Not too shabby !
This should sell pretty quick.

[wnarunm]

Not too shabby !
This should sell pretty quick.

still got it ,need to sell . will have my 73 for sale soon, b5 blue/built 440 draglites.$13,000

Attached File(s)

 P7250025.JPG ( 165.75K ) Number of downloads: 6

 

[skybolt]

72 duster 318 4spd car, now 440 auto, 540 soild cam, ported heads, trw's 10.1, main studs, have head studs, done rite motor ran 12.45 in a 4000lb charger motor has about 500 miles on it
trans 727 4200 dynamic converter man.valve body never run all new bolt in sprage new cheetha shifter new drive shaft
rear, mosher axles, new in the box bearing set 489 needs gears new super stock springs
front, big bolt disk's ex studs rebuild front end new ulm rad tti headers
body, new rear qu. 3 sets of fenders glass is in great shape
7500.00 for all or 5000.00 for body, motor 2500.00 cell (605)759-6788

Did you purchase or fab the inner fender panels?

[wnarunm]

Did you purchase or fab the inner fender panels?

here are the pics of my 73 for sale for $12,500
have a ton more pics just email me wnarunm69@yahoo.com

Attached File(s)

 P8140024.JPG ( 166.54K ) Number of downloads: 5
 P8140019.JPG ( 166.32K ) Number of downloads: 5
 P8140017.JPG ( 152.91K ) Number of downloads: 7
 P8140026.JPG ( 149.67K ) Number of downloads: 8
 P8140025.JPG ( 154.21K ) Number of downloads: 2

 

[wnarunm]

here are the pics of my 73 for sale for $12,500
have a ton more pics just email me wnarunm69@yahoo.com

price drop on my 73 dart to $10.500 might take partial trade try me.

Attached File(s)

 P8140024.JPG ( 166.54K ) Number of downloads: 2

 

[DusterAgogo]

Selling my 1974 Plymouth Valiant 318(90000) 904 Trans AC Car well maintained its wholelife im the
3rd owner of the car, its a Colorado car where it still lives, needs alittle TLC interror is in Good shape some tears here and there. some small rust in quarter panels and small dent in pass rear door i have a new door for it with matching interror. i also have all the glass for this other than the rear and windshild. Will Take Trades but my valiant is my daily driver so it must be ready to rock! Feel free to call me if you need to know anything about the car. ALL OFFERS WILL BE CONSITERD Thanks Caleb